$189.00 $179.00
VendingMiser VM170 with PIR Occupancy Sensor. EZ Mount Z-Bracket for indoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in locations where machine placements are subject to change or if wall mounting is not desired. *Must have 18″ of space above the vending machine.
Our most Popular Model – EZ Mount
VendingMiser VM170 with PIR Occupancy Sensor. EZ Mount Z-Bracket for indoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in locations where machine placements are subject to change or if wall mounting is not desired. *Must have 18″ of space above the vending machine
Parts Included:
1 VM170 assembled and ready for installation
There are no reviews yet.
$181.00 $171.00
VendingMiser VM171 Controller with internal Sensor Repeater for indoor use. Use as secondary unit with a VendingMiser VM170. Includes a 10′ repeater cable to connect to a VM150 or VM170. Up to three VM171 secondary units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
Several Machines in single area? Use with the VM170 or SM170
VendingMiser VM171 Controller with internal Sensor Repeater for indoor use. Use as secondary unit with a VendingMiser VM170. Includes a 10′ repeater cable to connect to a VM150 or VM170. Up to three VM171 secondary units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VM171 Controller – Ready to install
1 10′ Repeater Cable
There are no reviews yet.
$189.00 $179.00
Save an average 46% on the utility costs of operating a vending (soda/pop) machine with the VendingMiser VM150. The VM150 comes complete with a PIR (Passive Infra-Red) Occupancy Sensor that senses activity in the room and turns off the machine after no activity has been detected for ~15 minutes. Wall-mounted for indoor use. Use in locations where vending machine placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Our Second most Popular Unit – Both the control module and the the lightweight PIR sensor attach to the wall using the included mounting plate(s).
VendingMiser VM150 with PIR (Passive Infra-Red) Occupancy Sensor. Wall-mounted for indoor use. Use in locations where vending machine placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
$181.00 $171.00
VendingMiser VM151 Controller with internal Sensor Repeater. Wall mount for indoor use. Use as secondary unit with a VendingMiser VM150. Includes a 10′ repeater cable to connect to a VM150. Up to three VM151 units can be connected to a VM150 for a total of four units controlled by one sensor.
This model works well where you have a “bank” of machines
VendingMiser VM151 Controller with internal Sensor Repeater. Wall mount for indoor use. Use as secondary unit with a VendingMiser VM150. Includes a 10′ repeater cable to connect to a VM150. Up to three VM151 units can be connected to a VM150 for a total of four units controlled by one sensor.
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 10′ Repeater Cable
There are no reviews yet.
$199.00 $189.00
VendingMiser VM180 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. EZ Mount Z-Bracket for outdoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in outdoor locations where vending placements are subject to change or if wall mounting is not desired.
Outdoor Machine? Use the Outdoor EZ-Mount!
VendingMiser VM180 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. EZ Mount Z-Bracket for outdoor use attaches directly to a vending machine with industrial strength Velcro. Installs quickly and allows VendingMiser to move with machine. Use in outdoor locations where vending placements are subject to change or if wall mounting is not desired.
Parts Included:
VendingMiser VM180 Complete – Ready to install
There are no reviews yet.
$191.00 $181.00
VendingMiser VM181 Controller with internal Sensor Repeater and weatherproof controller housing. For outdoor use. Use as secondary unit to the VM180. Includes a 10′ repeater cable to connect to a primary VendingMiser. Up to three VM181 units can be connected to primary VendingMiser for a total of four units controlled by one sensor.
Several Machines in single area? Use with the VM180
VendingMiser VM181 Controller with internal Sensor Repeater and weatherproof controller housing. For outdoor use. Use as secondary unit to the VM180. Includes a 10′ repeater cable to connect to a primary VendingMiser. Up to three VM181 units can be connected to primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VM181 Controller – Ready to install
1 10′ Repeater Cable
There are no reviews yet.
$199.00 $189.00
VendingMiser VM160 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. Wall-mounted for outdoor use. Use in locations where vending placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Machine located Outdoors? We have a solution for that
VendingMiser VM160 with weatherproof PIR Occupancy Sensor and weatherproof controller housing. Wall-mounted for outdoor use. Use in locations where vending placements are not subject to change. Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 Outdoor Occupancy Sensor
1 Weatherproof Enclosure with screws
There are no reviews yet.
$191.00 $181.00
VendingMiser VM161 Controller with internal Sensor Repeater and weatherproof controller housing. Wall mount for outdoor use. Use as secondary unit to the VM160. Includes 10′ data cable to connect to primary VendingMiser. Up to three VM161 units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
For a “bank” of Outdoor machines – use with VM160
VendingMiser VM161 Controller with internal Sensor Repeater and weatherproof controller housing. Wall mount for outdoor use. Use as secondary unit to the VM160. Includes 10′ data cable to connect to primary VendingMiser. Up to three VM161 units can be connected to a primary VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 10′ Repeater Cable
1 Weatherproof Enclosure with screws
There are no reviews yet.
$99.00 $98.00
The VM2iQ is a VendingMiser for mounting internally
Access into the machine is required for installation
Parts Included:
1 VM2iQ Controller – Ready to install
The VM2iQ is a VendingMiser for mounting internally
Access into the machine is required for installation
Parts Included:
1 VM2iQ Controller – Ready to install
There are no reviews yet.
Greg Brokaw –
“We installed 87 of these VM150 units in Lincoln County School District in Missouri. We calculate that we are experiencing an annual savings amount that exceeds $8,500. We have easily paid for our Vending Miser units and installation in well under one year.” ~Greg Brokaw, District Engineering and Maintenance
Read the entire story
This review printed here with permission from Mr. Brokaw